F200 Baron Forced Action Mixer
3.5kW 1x110v
Robust and efficient forced action mixer with a long product life.
Specifications
- Indisputably powerful.
- Automatic emptying.
- Easy-to-clean outlet.
- Easily removable mixer arm.
- Interchangeable mixer shovels.
- Large rubber wheels make the mixer easy to move around.
| Motor | 3500 Watt |
| Voltage | 1×110 V |
| Gear, rpm. | 32 |
| Mixer capacity | 160 L |
| Vessel capacity | 200 L |
| Weight | 180 kg |
| Height | 116 cm |
| Width | 78 cm |
| Depth | 105 cm |
FAQs
Yes, the mixers work well with:-
- Concrete
- Epoxy resin
- Lime mortar
- Masonry mortar
- Plaster
- Polymer based minerals
- Render
- Resin Bound Gravel
- Sand and cement
- Screed
- Various adhesives
If your requirement is not covered please do enquire.
4 bags of resin kit in each batch.
Same type of machine – just different names.
A forced action mixer has paddles inside of it that help to mix the materials together. The paddles are attached to a shaft, which is turned by a motor. The speed of the motor can be varied, depending on how fast you need the mixer to work – depending on the material you are mixing.
The F200 takes 6 bags of resin kit and is popular with companies who decant their own hardener and resin.
Check the power supply for issues:-
- It should be connected to a transformer at the mains, 32amps lead from the transformer to the machine, less than 15 metres in length.
- A 16 amp extension reel is not suitable.
- Check for a build-up of resin on the mixer blades, and the centre column. This will cause the machine to labour and potentially strain your motor and cause electrical issues.
Your mixer should be cleaned a little and often.
- Ideally clean your drum with a xylene cloth every two mixes.
- All cleaning must be undertaken prior to the resin curing.
- If you allow a build-up of resin on the mixer blades, and centre column this will cause your machine to be laboured which will strain the motor and potentially lead to electrical faults.
Hard stone on the Mohs scale will cause your blades to wear down quicker.
The main difference is the F-series has 4 arms and E-series 3 arms.
For More Information
– Purchase
For more information about any of the machines featured here or to purchase please telephone 01527 913 081. Outside our open hours please use our contact form and we will call you back.
